Aquatics Discount UK AQUAMEDIC ELECTRONICS

DOSING PUMPS SP3000 Ref: 375
The aAquamedic dosing pump SP 3000 is an economic peristaltic pump for pumping small volumes of water. It is used with all bypass filters like the Nitratreductor and the Calciumreactor, but also to top up evaporated water combined with an aquaniveau and the Kalkwasserreactor. Another application is the automatic dosing of fertilisers and minerals. In freshwater aquariums, the iron fertiliser ferreal can be added daily. In coral reef aquariums, the complete Calcium and trace element addition (products of the Reef Life series) can be automatised with the SP 3000. The pump comes with a special hose, made of Santoprene, to guarantee a long lifetime. technical data, SP 3000 capacity, (fix) 3 l/h (c.0.8gph) max head (pressure) (10 m, c. 30 ft) 1 bar, c. 14.5 psi Motor Synchronous motor, 20 rpm power consumption 4.5 watts pump hose long life hose: Santoprene

Temp. Out of stock ?

Please email to see if in stock first.
£49.95

LF CONDUCTIVITY MONITOR Ref: 395
The salt content of water can be determined using the electrical conductivity. A special feature of the Aquamedic Conductivity monitor and controller LF 2001 C is the broad measuring and control range, that is divided into 2 ranges: From 0 - 2.000 µS, the unit is used for monitoring desalinated water and freshwater, in the range 0 - 200 mS for brackish and salt water. Thus the unit can be used for the control of reverse osmosis units and breeding tanks with soft water and for the control of the salt content in marine aquariums. The unit is supplied with a directly connected, seawater resistant graphite electrode.
£229.99

LIGHT COMPUTER Ref: 396

The Aquamedic Light Computer is designed to closely simulates nature's illumination for the aquarium. It is supplied with three separate programmable channels. Channel one controls the primary lamp (e.g. metal halide, maximum 750 Watt). Channel two controls the additional light (e.g. blue fluorescent, maximum 300-Watt). The third channel, the specialty of the computer, controls a night light with a maximum of 100 watt. The night-light's intensity is controlled using an internal program to simulate the natural 29-day moon cycle. These three channels therefor simulate the cycle dusk to dawn. This cycle is of major importance for many plants and animals in setting a rhythm in their reproduction cycle.

£284.99

SOILENOID VALVE Ref: 397

The Aquamedic Solenoid Valve is a quality valve with pressure fittings for 6-mm flexible hose. The body of the valve is made from brass and is chrome plated. To prevent overheating, the valve uses 3.5-watt electrical power. The maximum useable gas pressure 6 bar. The valve can be connected to all CO2 units. Together with a timer, the valve can be used as a night shut off. In combination with a pH controller automatic control of the CO2 supply and the pH value.

£35.99

TEMPERATURE CONTROLLER Ref: 398

The temperature controller 2001 C is delivered in 2 versions: 2001 HC for the control of heating systems and 2001 C for the control of cooling units. The control range varies from 0 - 50°C, with a precision of 0,1°C. The maximum wattage is 1.000 Watt for heaters and 600 Watt for coolers. The unit is supplied with a seawater proofed temperature probe.

£129.99

WAVE MODULE Ref: 399
Changing circulation is a must for a modern coral reef aquarium. The Aqua Medic Wave is a microprocessor programmed pump controller that can control three circulation pumps and one filter pump. The Wave can randomly activate between zero and three pump combinations. The activation frequency can be adjusted between 2 and 8 minutes. The fourth channel (filter pump) is continuously on. For feeding, especially invertebrates with plankton food, a feeding pause button knob can be activated; this stops all the pumps, including the filter pump, for approximately 10 minutes. An integrated light sensor ensures that during darkness no more than one circulation pump is active at a time. Power head pumps with a maxim of 100 watt per channel can be connected.
£174.99

PH CONTROLLER Ref: 400
The pH controller 2001 C is a precision instrument to control the pH value in aquariums. In combination with a supply of CO2 (CO2 unit plus solenoid valve), the pH in an aquarium can be kept at a constant level and the CO2 supply to water plants can be ensured. The unit is supplied with a large LED display and the control range is digitally adjustable from pH 3.5 to 10.5. The pH controller has a BNC connection for pH electrodes. We recommend the use of the original Aqua Medic plastic shaft electrode.
£154.99

PH COMPUTER Ref: 401

The Aqua Medic pH Computer has the most modern microprocessor installed. This fulfills the high demands for accuracy when measuring and controlling the needed values. Water proofed finger-touch keys are used to set the needed values and calibrate the electrode. The pH Computer is used to control the exact values of pH in the aquarium or Aqua Medic Calcium Reactor. The controlling accuracy if fixed at 0,05 pH. The computer can switch up to 500 watts using the supplied external electrical socket. When the calibration key has been selected the unit will automatically calibrate itself with the electrode. A plastic shaft pH electrode with BNC fitting and the correct calibration fluids are included.

£254.99

Links Ref: 1326

POND FILTERS

. Ref: 1389

AQUARIUM SUPPLIES